Harmonic Filters

  • Reduction of harmonics and low frequency distortion
  • Improvement of the THDi values (<5% possible)
  • Compliance with the harmonic emission requirements of IEC 61000-3-12
  • Less expensive than active harmonic filters
  • Significantly reduced input current


HFE-5P (THDi <5%*)
HFE-8P (THDi <8%*)

High Performance Harmonicfilter

  • Current ratings from 10 A up tp 410 A
  • For power up to 250 kW
  • 380 V – 690 V (50 / 60 Hz), 3-phasig
  • THDi up to 5 % is possible (typical 10-16 %*)
  • Especially for devices with B6 rectifier bridge
  • Reduction up to 50th harmonics (2.5 / 3.0 kHz)
  • Switchable capacitors
  • No leakage current
  • For higher requirements

* at RSCE ≥ 66, THDU ≤ 2%
Jump to downloads

fourier-analysis

Comparison THDi values:

B6 rectifier without choke B6 rectifier with uk 4% choke B6 rectifier with HFE-8P B6 rectifier with HFE-5P B6 rectifier with HFE-8P and DC choke B6 rectifier with HFE-5P and DC choke
80 % 40 % <16 % <10 % <8 % <5 %
Current without Harmonic filter Current with Harmonic filter HFE
ohne_hfe mit_hfe

Standards
· IEC/EN 61000-3-2
· IEC/EN 61000-3-12
· IEC/EN 61000-3-4
· IEC 61000-2-2
· IEC 61000-2-4

Downloads

FileSize
download » en » Data_Sheets » EMC » Harmonic_Filters
EPA_Harmonic-filters_HFE-5P-600-60_data-sheet.pdf2.42 M
EPA_Harmonic-filters_HFE-5P_data-sheet.pdf2.61 M
EPA_Harmonic-filters_HFE-8P-600-60_data-sheet.pdf2.42 M
EPA_Harmonic-filters_HFE-8P_2.2-182_data-sheet.pdf2.60 M
EPA_Harmonic-filters_HFE-8P_217-1030_data-sheet.pdf2.47 M
EPA_Harmonic-filters_NF-HPHF_data-sheet.pdf725.28 K
download » en » Manuals » EMC
EPA_Harmonic-Filters_HFE-5P_HFE-8P_Instruction_Manual.pdf19.52 M
EPA_Harmonic_Filter_HFE-A_HFE-B_Instruction_Manual.pdf3.10 M